• 1
  • 2
  • 3

P

product

产品中心

NT3000 Diesel injection pump test bench
  • clicks:423
  • Product Category: Products Common Rail Injector/Pump Test Bench
  • product description:
  • Main function

    1. Measurement of each cylinder delivery at any speed.
    2. Test point and interval angle of oil supply of injection pump.
    3. Checking and adjust the mechanical governor.
    4. Checking and adjusting the distributor pump.
    5. .Experiment and adjusting of behavior of supercharging and compensatory       device.
    6. Measurement of oil return of distributing pumps.
    7. Testing of the electromagnetic valve of distributor pump.(12V/24V)
    8. Measurement of the internal pressure of distributor pump.
    9. Checking of the advance angle of advance device.(on request)
    10. Checking the sealing of injection pump body
    11. Install tube of auto-sucking oil supply can check on oil supply pump (including VE pump.)
    12. Checking the travel of stroke
    13.oil lubricate (on request)
    14.Cast iron base(on request)
    15. Forced cooler (on request)



    Specifications

    1.Main motor output power(kw):7.5,11,15,18.5,22
    2.Stroke Counting (Rpm):50-9999
    3.Standard injectors: ZS12SJ1
    4.Low pressure of fuel oil pressure(Mpa):0~0.4
    5.High pressure of fuel oil pressure(Mpa):0~4
    6.Power of fuel pump motor (kw):0.75
    7.Volume of fuel tank(L):40
    8.Number of cylinders:12
    9.Height of principal axis center (mm):125
    10.Filter oil precision of test bench(μ):4.5~5.5
    11.big and small volumetric cylinder(ml):150    45
    12.Control temperature of fuel (°C):40±2
    13.Flywheel inertia(kg*m):0.8~0.9
    14.Measuring range of flow meter(L/m):10~100
    15.DC electrical source(V):12  24
    16.Positive pressure of air supply(Mpa):0~0.3
    17.Negative pressure of air supply(Mpa):-0.03~0
    18.Dimension of Packing ( L*W*H(m )):2.42*1.14*1.83
    19.Gross weight of Test bench(kg):900

    No. Items Data
    1 Main motor output power(kw) 7.5,11,15,18.5,22
    2 Stroke Counting (Rpm) 50-9999
    3 Standard injectors ZS12SJ1
    4 Low pressure of fuel oil pressure(Mpa) 0~0.4
    5 High pressure of fuel oil pressure(Mpa) 0~4
    6 Power of fuel pump motor (kw) 0.75
    7 Volume of fuel tank(L) 40
    8 Number of cylinders 12
    9 Height of principal axis center (mm) 125
    10 Filter oil precision of test bench(μ) 4.5~5.5
    11 big and small volumetric cylinder(ml) 150    45
    12 Control temperature of fuel (°C) 40±2
    13 Flywheel inertia(kg*m) 0.8~0.9
    14 Measuring range of flow meter(L/m) 10~100
    15 DC electrical source(V) 12  24
    16 Positive pressure of air supply(Mpa) 0~0.3
    17 Negative pressure of air supply(Mpa) -0.03~0
    18 Dimension of Packing ( L*W*H(m )) 2.42*1.14*1.83
    19 Gross weight of Test bench( kg) 900

Copyright 2016-2019(c) Guangzhou Honow Automobile Service Equipment Co,. Ltd.

扫描一下